Articles, Blog

How to make a paper double barrel shotgun that shoots


hi everyone.. in this tutorial i’m gonna show you how to make a paper double barrel shotgun i’m using here an a4 size printing paper which i’m gonna use to make 7 paper rolls like those each paper roll consists of two sheets of paper so the first step is to roll both of them together using a tube of paper glue after that fix the paper roll with some tape then use a small stick to push the tube out after you make 5 paper rolls take two of them and use each one to roll the last two paper rolls now you have one roll inside each one which will lead us to the next step where we’re gonna drage both rolls to the outside forming the long barrel of the shotgun after that glue both barrels together make sure that you don’t glue the area at the end because that’s where you’re gonna put the trigger now take another paper roll and glue it at the bottom here then progressively press on it to form a sloped shape out of it take another paper roll and glue it right below the first one then make a sloped shape as you did previously and keep it in place by putting some tape a round it take the last paper roll and cut it into three pieces glue one at the top here , glue another one at the bottom and glue the last one to the back this will form the stock of the shotgun now we’ll make a cover for it by taking a sheet of paper and folding it the same way i do here take that and cover the stock with it then glue it in place finaly we need to make one last paper roll using a pencil and after fixing it cut it into three peices take the smallest one and fold it like that then glue it at the front of the barrel after that cut through the paper roll at the unglued area that i told you about then take the middle size piece of roll and fold it reversely like that and make an angled cut to the top , this is gonna be the trigger next , double a rubber band and put it around the trigger then stick the trigger though the cut you just made until it gets out from the other side at the same time hang the rubber band on the tip of the roll after that push the trigger a little bit to the back and fix a piece of tape in front of it to prevent it from slipping this way when ever you pull the trigger the rubber band will pull it back now take the last piece of roll and shape it into a trigger guard then glue it in place under the trigger it’s time now to make some shootings so get one or two rubber bands and round them together then strech them between the front sight and the trigger , once you pull the trigger the rubber band will be released

100 thoughts on “How to make a paper double barrel shotgun that shoots

  1. hey bud i have a favor to ask of you can you make me that gun im unable to make it every time i make it fails everytime and i really really like all of your viedos

  2. fucking shit!!!!!!!!!!!๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆ๐Ÿ˜ˆโœŒ๏ธ

  3. O M G I MADE IT I made the shotgun omg !!!!!!! But I ran out of glue ๐Ÿ˜ข๐Ÿ˜ข๐Ÿ˜ข๐Ÿ˜ฅ๐Ÿ˜ฅ๐Ÿ˜ฅ๐Ÿ˜ฅ๐Ÿ˜ญ๐Ÿ˜ญ๐Ÿ˜ญ๐Ÿ˜ญ๐Ÿ˜ญ๐Ÿ˜ญ๐Ÿ˜ญ๐Ÿ˜ญ

  4. i did it all with tape.
    it turned out well.
    its so cool.
    my freinds are jealous.
    neither if they have a paper kunai.

  5. i shortened the stock and made 1 1/2 of paper rolls + paper properly folded and all that = FORTNITE PUMP (with two barrels)

  6. ุงุฎูŠ ุดูƒุฑุง ุจุณ ู…ุนู„ุด ุชูˆู„ูŠ ุจุงู„ุนุฑูŠูŠ ุงู„ูŠ ุชุทู„ู‚ ู‡ูŠ ุงู„ู…ุทุงุทุฉ ุงูˆ ุงู„ุทู„ู‚ุฉ ุดูƒุฑุง

Leave a Reply

Your email address will not be published. Required fields are marked *