Articles, Blog

Fish hunting Tutorial – Cara Membuat Peluru Paser untuk Menembak Ikan


I will show you some materials to make arrows for fishing dart. The first, 9mm brass sticks. 3mm Stainless steel sticks. 6mm Aluminum pipe. 9mm Teflon Plastic All that materials will modified with Lathe Machine for making arrows. First step, we cut the aluminum pipe. we cut it for 3cm long. The result like this… Next material is Plastic stick. We shaped plastic stick like this. This is the part of arrow behind We put in plastic stick on aluminum pipe. We drill it to make a hole. Next material is Brass Stick. We will process it as Arrows head of Fishing Dart. We drill the brass to make a hole. Sharp the brass in one side to make arrow head (cone-shaped). We filed the bottom of arrow head to make sharp hook. The purpose is to hook the fish when we shoot it going through the fish flesh. Sharp all the side of the hooks. The next step, we process the stainless stick with Grinding Machine Make it thin with Grinding Machine in order to put in the arrow head. We put it in arrow head. And then we knock it with the hammer to make it fix with arrow head. It doesn’t need glue. Grind the arrow head with Grinding Machine to make it sharp. This is the result for grinding the arrow head. Put it again into Lathe Machine to make the final touch for arrow head. Use sandpaper to make arrow head smooth. For the best result accuracy is about 17cm for the PCP Air Rifle and 14 Cm for Air Rifle Hand pump. We make ring for the holding of fishing line Knot The next step, put the plastic stick into stainless stick of arrow head. put the barrel of Fishing dart gun into plastic stick to measure for diameter. The next processing is to make aluminum holder. The function is for holding the aluminum when the wind push from behind the arrow. Make sure the size of plastic stick fix with the aluminum pipe. (not too tight). Make cone-shaped in front of aluminum pipe. Drill the plastic stick to make a hole for fishing line. This is the of processing of making arrow for shooting fish. How to modified air rifle for shooting fish. The materials are: (1.) Gun sight (front and behind), (2.) 9mm Stainless pipe with the center diameter 6mm and outside diameter 13mm. (3) Paper tape, (4)Glue,(5) Fishing Line,(6)Reel Seat,(7) Ring Guide,(8)Fishing rod. Gun sight (front) Gun sight (Behind) 13mm Stainless pipe for shroud 85cm long for stainless pipe The smaller size of stainless pipe for barrel of Fishing dart gun. (9mm outside and 6mm for diameter inside) Wrap the pipe with the paper tape/plastic tape. Place the paper tape (top, center, and below) Drill the pipe for air transfer from PCP Air rifle/ Hand pump rifle. Because we will install it to rifle as the barrel Before we install it into the barrel, we need glue. The bottom of barrel, we put into rifle’s chamber. Nah, how to avoid the air leak from the barrel behind, so we need pipe holder. The function of small pipe beside to avoid air leaking also to hold the arrow not to close air transfer from the rifle. After finishing installing the barrel, we place gun sight. place the ring guide Place the reel seat The tools for shooting fish: Fish dart rifle, Fishing line, Polarized glasses, arrows, fishing reel, fishing road as stick. Fishing reel Fishing line Bicycle brake wire The function is to push the arrow into the barrel We use polarized sun glasses to increase our vision to find fish The arrows How to install fishing line into arrow. Pull the aluminum pipe. Put the fishing line We tie fishing line to the arrow Install like this Pull the arrow through the ring guides Push it into the barrel Take Bicycle brake wire to push to arrow until the bottom of the barrel Don’t forget, before we shoot the rifle, we have to open the fishing reel. The rifle is ready to use. Thank you for watching…See You…

100 thoughts on “Fish hunting Tutorial – Cara Membuat Peluru Paser untuk Menembak Ikan

  1. Mas.. tips tembak ikan di kedalaman semeter donk.. katanya pluru pean cocok untuk ikan di kedalaman itu.. itu mbidiknya di pas in mana nya mas..???

  2. mas adi.. numpang tanya.. apa rok pasernya di buat sesak ma larasnya…??? soalnya benang kan ikat nya di bawah rok paser..

  3. Maaf mas mo tanya,klau senapan uklik pakai pluru paser segede itu powernya apa kuat n berapa x pompa,cz aq buat yg ukuran paser 4,5 q pompa 20 x gk bisa memuaskan kna ikan besar cm d ujungnya paser ja,apakah tabung kapsulnya perlu d ganti yg panjang biar bisa kyk pny mas, mksh sblomnya tas info & saranya

  4. Hadiiir booos.
    Sekalian mau nanya"nih.
    Klu slongsong polos ukuran 4,5 berapa harganya????
    Trimksih

Leave a Reply

Your email address will not be published. Required fields are marked *